-40%
Suspension Vise Soft Jaw, Clamp, Block, Holder for Most Shocks With Magnets
Suspension Vise Soft Jaw, Clamp, Block, Holder for Most Shocks With Magnets
Suspension Vise Soft Jaw, Clamp, Block, Holder for Most Shocks With Magnets
Suspension Vise Soft Jaw, Clamp, Block, Holder for Most Shocks With Magnets
Suspension Vise Soft Jaw, Clamp, Block, Holder for Most Shocks With Magnets
Suspension Vise Soft Jaw, Clamp, Block, Holder for Most Shocks With Magnets
Suspension Vise Soft Jaw, Clamp, Block, Holder for Most Shocks With Magnets
Suspension Vise Soft Jaw, Clamp, Block, Holder for Most Shocks With Magnets
Suspension Vise Soft Jaw, Clamp, Block, Holder for Most Shocks With Magnets
Suspension Vise Soft Jaw, Clamp, Block, Holder for Most Shocks With Magnets
Suspension Vise Soft Jaw, Clamp, Block, Holder for Most Shocks With Magnets
Suspension Vise Soft Jaw, Clamp, Block, Holder for Most Shocks With Magnets

Suspension Vise Soft Jaw, Clamp, Block, Holder for Most Shocks With Magnets

$ 11.61

Availability: 310 in stock
  • Refund will be given as: Money Back
  • Return shipping will be paid by: Buyer
  • Restocking Fee: No
  • Condition: New
  • Application: Bicycle
  • Type: Suspension Vise
  • Item Length: 135mm
  • Country/Region of Manufacture: United States
  • All returns accepted: Returns Accepted
  • Material: PETG
  • Bristle Length: 135mm
  • Item must be returned within: 30 Days
  • Color: Orange
  • Brand: RNoks Designs

    Description

    I've put together (what to me) is a relatively complete bench vise soft jaw clamp for your next suspension overhaul. This is split up into 3 kits. One kit is 2 halves.
    Item Specs:
    Two 12x3mm Neodymium magnets per half - quite strong
    Magnets are around 70mm / 2-3/4" apart
    Kits vary a little, but all are in the 135mm / 5-1/4" length range
    3D printed using PETG filament, a stronger alternative to the commonly used PLA material. Print settings built around strength
    Material is soft enough to not damage the shaft, strong enough to hold it tight.
    Halves snap together with magnets for easy storage (see photo)
    Kit #1 Includes:
    28.6mm / 1-1/4": Fox 36/40 FIT R and 36/40 FIT RC2 damper base-valve body
    25.4mm / 1": Fox X damper (base valve body) & some rear shock damper cylinders, Fox 32 FIT Terralogic damper cylinder, Marzocchi Doppio air-spring cylinder
    23.8mm / 15/16": Fox 36 O/B R damper base-valve body, Shimano Saint and XTR front hub thru-axle
    22.2mm / 7/8": Manitou Cartridge Intrinsic & TPC Cartridge damper cylinder
    Kit #2 Includes:
    21.0mm / 53/64": Shimano 15mm thru-axle front hub
    19.5mm / 3/4": Fox dampers, base valve body (R, RL, RLC, RLT)
    18.7mm / 47/64": Fox Gen 3 O/B RL damper cylinder
    17.5mm / 11/16": Fox 36/40 FIT RC2 damper cylinders, TALAS Lower Air Shaft
    16.7mm / 21/32": Fox FIT 32 RL & RLC damper-cartridge body
    Kit #3 Includes:
    15.9mm / 5/8": Fox TALAS IFP Shaft
    15.0mm 19/32": Marzocchi SFA/ATA air-piston shafts
    12.7mm / 1/2": RockShox Vivid rear shock damper shaft, DHX RC4
    10mm / 25/64": Fox and Marzocchi forks (damper and piston shafts)
    9.53mm / 3/8": Unsure of what models, but a common size
    9mm / 23/64": RockShox Ario/Bar/Monarch air-shock damper shafts
    8mm / 5/16": Fox, Manitou and Marzocchi forks (damper and piston shafts)
    Above fitment is by no means complete as so many other models are not listed and will use some of these sizes. Also, please note that
    actual compatibility is for you to confirm before purchase
    . These values looked correct when I made these, but suspension evolves so quickly I cannot guarantee fitment based on the descriptions.
    If you have a desire for a custom version with your desired sizes, send me a message and we'll work out a deal.